Sole pads are used at the base of a scaffold to spread the load of the scaffold tube standards in conjunction with a steel base plate. They are typically just shorter cut lengths of timber scaffold board and are used either singularly or can be packed up where design guidance or ground conditions dictate. Our
Like the Screwbolt, the Excalibur Eyebolt is very versatile with a simple and fast installation process. Giving a close to the edge ability due to its non expanding design, it provides exceptional strength and immediate load capacity in many substrates. Available in various diameters for all projects, giving a cost effective solution. Suitable for scaffold,
Excalibur Scaffolding Ring Bolts 12mm The Excalibur Scaffolding Ring Bolts 12mm is used for the fixing of a vertical scaffold tube to a structure – safely, conveniently and securely. A major advantage of this type of anchor lies in it being a once piece tie; when the project is finished and the scaffold struck, there
Powerclad Scaffold Sheeting POWERCLAD® Scaffold Sheeting is a reinforced polyolefin sheeting system for temporary containment and weather protection applications. Powerclad reinforcement bands incorporate eyelets every 10cm to provide a versatile system for all tube & fitting and modular scaffold systems and the ability to vary the support density according to anticipated wind forces. Features Available
Ejot Scaffold Tie are sold as a two piece Scaffold tie. Made from hard wearing stainless steel and suitable for timber frame construction. The 6.5mm x 6mm self tapping screw is installed into the timber with a TORX T30 head before attaching the M10 Ring bolt by the screw head.
Scaffolding Supa Tie E is used to secure a scaffold tube perpendicular to a structure. EN74 Standard Scaffold fitting and is used in conjunction with our M16 Drop in Anchor it is a safe and versatile scaffold tie.
Friulsider Scaffold Ties are available in two lengths, 120mm and 350mm to suit any situation. The Friulsider Scaffold Ties are a versatile, strong and robust alternative when used with our Scaffold Hook coupler. Used with a 14mm plastic plug for attachment into a range of materials.
M16 Scaffold Ring Tie is sometimes referred to as a lollipop or Hilti type scaffold tie. The ring tie is one of the original scaffold ties and all M16 Scaffold Ring Ties are made from heavy duty steel and used in conjunction with the M16 drop in anchor or M16 Expanding Anchor.
Scaff Gap The work at height regulations 2005 impose a duty to provide safe working platforms. One of the most common causes of injury on construction sites is falling objects hitting site operatives. The 50mm gap between scaffold boards that is created by the inside supporting standards represents a very real hazard in this regard,
No suggestions found.
No results found in products.
No results found in other sections.
